EDM Machine Safety instructions and matters to be heeded
(1). Please choose specialized discharge oil of high ignition point which must be above 750C
(2). Stop using the processing machine when the operators are not around. The entire machining process must be attended to by specialized personnel.
(3). Keep the processing liquid 15cm higher than the processed material.
(4). Fire control device is necessary around the machine tool. The 1211 extinguisher could be a fine choice.
(5). No operation is allowed with wet hands. Checkup is to be done 5 minutes after the main power supply is cut off so that electric shock could be avoided.
(6). Insulating pad and non-slip pad must be ready in order so that electric shop and slipping could be avoided.
(7). In order to avoid electric shock, please wear protective gloves and do not touch the electric poles.
(8). Please check whether safety devices are in order before any operation.
(9). The repairs of the machine tool must be done under the instructions of certified specialized personnel. No unauthorized change is allowed to be made on the machine tool.
(10). Please make sure the power wire and the ground wire are properly connected.
(11). Everything is to be done strictly according to the manual.
(12). The controller must be kept well-ventilated.